Pass NSE4_FGT-7.0 Exam Latest Practice Questions Updated on Sep 19, 2023 [Q66-Q91]

Share

Pass NSE4_FGT-7.0 Exam Latest Practice Questions Updated on Sep 19, 2023

Fortinet NSE4_FGT-7.0 Study Guide Archives 


Fortinet NSE4_FGT-7.0 certification exam is designed for network administrators, security engineers, and other IT professionals who are responsible for managing network security using FortiGate firewalls. NSE4_FGT-7.0 exam covers a wide range of topics, including network security fundamentals, firewall policies and rules, VPNs, high availability, and advanced security features such as SSL inspection, IPS, and application control.


The Fortinet NSE4_FGT-7.0 exam covers a wide range of topics, including network security concepts, firewall policies, VPNs, and advanced security services. Candidates are required to have a deep understanding of FortiGate devices, including their architecture, configuration, and management. They must also have a solid understanding of networking concepts, such as TCP/IP, routing, and switching.


Fortinet NSE4_FGT-7.0 exam is a multiple-choice exam that consists of 60 questions. NSE4_FGT-7.0 exam is timed and candidates have 120 minutes to complete it. NSE4_FGT-7.0 exam covers a wide range of topics, including Fortinet's FortiOS 7.0 operating system, network security policies, VPN configurations, and network routing. Successful candidates will receive the Fortinet NSE 4 certification, which is recognized as a valuable credential in the network security industry.

 

NEW QUESTION # 66
Refer to the exhibit.

Given the interfaces shown in the exhibit. which two statements are true? (Choose two.)

  • A. Traffic between port2 and port2-vlan1 is allowed by default.
  • B. port1-vlan and port2-vlan1 can be assigned in the same VDOM or to different VDOMs.
  • C. port1-vlan10 and port2-vlan10 are part of the same broadcast domain.
  • D. port1 is a native VLAN.

Answer: B,D

Explanation:
Explanation
https://community.fortinet.com/t5/FortiGate/Technical-Tip-rules-about-VLAN-configuration-and-VDOM-interfa
https://kb.fortinet.com/kb/viewContent.do?externalId=FD30883


NEW QUESTION # 67
An administrator must disable RPF check to investigate an issue.
Which method is best suited to disable RPF without affecting features like antivirus and intrusion prevention system?

  • A. Disable the RPF check at the FortiGate interface level for the reply check.
  • B. Enable asymmetric routing, so the RPF check will be bypassed.
  • C. Enable asymmetric routing at the interface level.
  • D. Disable the RPF check at the FortiGate interface level for the source check.

Answer: D

Explanation:
Reference:
Infrast 7.0 SG page 38 RPF checking can be disabled in tho ways. If you enable asymmetric routing, it will disable RPF checking system wide. However this reduces the security of you network greatly. Features such us ANTIVIRUS, and IPS become non-effective. So, if you need to disable RPF checking, you can do so at the interface level using the command: config system interface edit <interface> set src-check [enable | disable] end


NEW QUESTION # 68
Refer to the exhibit.

In the network shown in the exhibit, the web client cannot connect to the HTTP web server. The administrator runs the FortiGate built-in sniffer and gets the output as shown in the exhibit.
What should the administrator do next to troubleshoot the problem?

  • A. Capture the traffic using an external sniffer connected to port1.
  • B. Run a sniffer on the web server.
  • C. Execute a debug flow.
  • D. Execute another sniffer in the FortiGate, this time with the filter "host 10.0.1.10"

Answer: C


NEW QUESTION # 69
When configuring a firewall virtual wire pair policy, which following statement is true?

  • A. Only a single virtual wire pair can be included in each policy.
  • B. Exactly two virtual wire pairs need to be included in each policy.
  • C. Any number of virtual wire pairs can be included in each policy, regardless of the policy traffic direction settings.
  • D. Any number of virtual wire pairs can be included, as long as the policy traffic direction is the same.

Answer: D

Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD48690


NEW QUESTION # 70
When configuring a firewall virtual wire pair policy, which following statement is true?

  • A. Only a single virtual wire pair can be included in each policy.
  • B. Exactly two virtual wire pairs need to be included in each policy.
  • C. Any number of virtual wire pairs can be included in each policy, regardless of the policy traffic direction settings.
  • D. Any number of virtual wire pairs can be included, as long as the policy traffic direction is the same.

Answer: D

Explanation:
Reference:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/166804/virtual-wire-pair


NEW QUESTION # 71
Refer to the exhibit.




The exhibit contains a network diagram, central SNAT policy, and IP pool configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24.
The LAN (port3) interface has the IP address 10.0.1.254/24.
A firewall policy is configured to allow to destinations from LAN (port3) to WAN (port1).
Central NAT is enabled, so NAT settings from matching Central SNAT policies will be applied.
Which IP address will be used to source NAT the traffic, if the user on Local-Client (10.0.1.10) pings the IP address of Remote-FortiGate (10.200.3.1)?

  • A. 10.200.1.1
  • B. 10.200.1.99
  • C. 10.200.1.49
  • D. 10.200.1.149

Answer: B


NEW QUESTION # 72
Refer to the exhibits.


The exhibits show the SSL and authentication policy (Exhibit A) and the security policy (Exhibit B) tor Facebook.
Users are given access to the Facebook web application. They can play video content hosted on Facebook but they are unable to leave reactions on videos or other types of posts.
Which part of the policy configuration must you change to resolve the issue?

  • A. Force access to Facebook using the HTTP service.
  • B. Additional application signatures are required to add to the security policy.
  • C. The SSL inspection needs to be a deep content inspection.
  • D. Add Facebook in the URL category in the security policy.

Answer: C

Explanation:
The lock logo behind Facebook_like.Button indicates that SSL Deep Inspection is Required.


NEW QUESTION # 73
By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers.
Which CLI command will cause FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering?

  • A. set webfilter-force-off disable
  • B. set webfilter-cache disable
  • C. set fortiguard-anycast disable
  • D. set protocol tcp

Answer: C

Explanation:
Reference:
"By default, FortiGate is configured to enforce the use of HTTPS port 443 to perform live filtering with FortiGuard or FortiManager. Other ports and protocols are available by disabling the FortiGuard anycast setting on the CLI."


NEW QUESTION # 74
Which statement about video filtering on FortiGate is true?

  • A. Video filtering FortiGuard categories are based on web filter FortiGuard categories.
  • B. Full SSL Inspection is not required.
  • C. It is available only on a proxy-based firewall policy.
  • D. It inspects video files hosted on file sharing services.

Answer: C


NEW QUESTION # 75
Which three statements are true regarding session-based authentication? (Choose three.)

  • A. It can differentiate among multiple clients behind the same source IP address.
  • B. It requires more resources.
  • C. It is not recommended if multiple users are behind the source NAT
  • D. IP sessions from the same source IP address are treated as a single user.
  • E. HTTP sessions are treated as a single user.

Answer: A,B,E


NEW QUESTION # 76
Which two inspection modes can you use to configure a firewall policy on a profile-based next-generation firewall (NGFW)? (Choose two.)

  • A. Certificate inspection
  • B. Flow-based inspection
  • C. Proxy-based inspection
  • D. Full Content inspection

Answer: B,C


NEW QUESTION # 77
A FortiGate is operating in NAT mode and configured with two virtual LAN (VLAN) sub interfaces added to the physical interface.
Which statements about the VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in different subnets.

  • A. The two VLAN sub interfaces can have the same VLAN ID, only if they belong to different VDOMs.
  • B. The two VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in the same subnet.
  • C. The two VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in different subnets.
  • D. The two VLAN sub interfaces must have different VLAN IDs.

Answer: D

Explanation:
FortiGate_Infrastructure_6.0_Study_Guide_v2-Online.pdf -> page 147
"Multiple VLANs can coexist in the same physical interface, provide they have different VLAN ID"


NEW QUESTION # 78
An administrator is configuring an IPsec VPN between site A and site B.
The Remote Gateway setting in both sites has been configured as Static IP Address.
For site A, the local quick mode selector is 192.168.1.0/24 and the remote quick mode selector is 192.168.2.0/24.
Which subnet must the administrator configure for the local quick mode selector for site B?

  • A. 192.168.1.0/24
  • B. 192.168.2.0/24
  • C. 192.168.0.0/24
  • D. 192.168.3.0/24

Answer: B


NEW QUESTION # 79
Which two statements are true about the RPF check? (Choose two.)

  • A. The RPF check is run on the first sent and reply packet of any new session.
  • B. The RPF check is run on the first sent packet of any new session.
  • C. RPF is a mechanism that protects FortiGate and your network from IP spoofing attacks.
  • D. The RPF check is run on the first reply packet of any new session.

Answer: B,C

Explanation:
Reference: https://www.programmersought.com/article/16383871634/


NEW QUESTION # 80
Which two policies must be configured to allow traffic on a policy-based next-generation firewall (NGFW) FortiGate? (Choose two.)

  • A. SSL inspection and authentication policy
  • B. Policy rule
  • C. Security policy
  • D. Firewall policy

Answer: A,C

Explanation:
Reference: https://docs.fortinet.com/document/fortigate/5.6.0/cookbook/38324/ngfw-policy-based-mode


NEW QUESTION # 81
Examine the network diagram shown in the exhibit, then answer the following question:

Which one of the following routes is the best candidate route for FGT1 to route traffic from the Workstation to the Web server?

  • A. 10.4.200.0/30 is directly connected, port2
  • B. 172.16.32.0/24 is directly connected, port1
  • C. 172.16.0.0/16 [50/0] via 10.4.200.2, port2 [5/0]
  • D. 0.0.0.0/0 [20/0] via 10.4.200.2, port2

Answer: B


NEW QUESTION # 82
An administrator does not want to report the logon events of service accounts to FortiGate. What setting on the collector agent is required to achieve this?

  • A. Add user accounts to the Ignore User List.
  • B. Add user accounts to the FortiGate group fitter.
  • C. Add the support of NTLM authentication.
  • D. Add user accounts to Active Directory (AD).

Answer: A

Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD38828


NEW QUESTION # 83
Which three criteria can a FortiGate use to look for a matching firewall policy to process traffic? (Choose three.)

  • A. Source defined as Internet Services in the firewall policy.
  • B. Lowest to highest policy ID number.
  • C. Destination defined as Internet Services in the firewall policy.
  • D. Highest to lowest priority defined in the firewall policy.
  • E. Services defined in the firewall policy.

Answer: A,C,E


NEW QUESTION # 84
Which of statement is true about SSL VPN web mode?

  • A. The tunnel is up while the client is connected.
  • B. It supports a limited number of protocols.
  • C. The external network application sends data through the VPN.
  • D. It assigns a virtual IP address to the client.

Answer: B

Explanation:
Explanation
FortiGate_Security_6.4 page 575 - Web mode requires only a web browser, but supports a limited number of protocols.


NEW QUESTION # 85
Refer to the exhibit.

The global settings on a FortiGate device must be changed to align with company security policies. What does the Administrator account need to access the FortiGate global settings?

  • A. Change password
  • B. Enable restrict access to trusted hosts
  • C. Enable two-factor authentication
  • D. Change Administrator profile

Answer: D

Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD34502


NEW QUESTION # 86
When configuring a firewall virtual wire pair policy, which following statement is true?

  • A. Only a single virtual wire pair can be included in each policy.
  • B. Exactly two virtual wire pairs need to be included in each policy.
  • C. Any number of virtual wire pairs can be included in each policy, regardless of the policy traffic direction settings.
  • D. Any number of virtual wire pairs can be included, as long as the policy traffic direction is the same.

Answer: D


NEW QUESTION # 87
Which statements are true regarding firewall policy NAT using the outgoing interface IP address with fixed port disabled? (Choose two.)

  • A. This is known as many-to-one NAT.
  • B. Source IP is translated to the outgoing interface IP.
  • C. Port address translation is not used.
  • D. Connections are tracked using source port and source MAC address.

Answer: B,C


NEW QUESTION # 88
Examine this output from a debug flow:

Why did the FortiGate drop the packet?

  • A. It failed the RPF check.
  • B. It matched an explicitly configured firewall policy with the action DENY.
  • C. The next-hop IP address is unreachable.
  • D. It matched the default implicit firewall policy.

Answer: D

Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=13900
If it was dropped by RPF, the log would've been "reverse path check fail, drop" See KB ==> https://kb.fortinet.com/kb/documentLink.do?externalID=FD31702


NEW QUESTION # 89
You have enabled logging on your FortiGate device for Event logs and all Security logs, and you have set up logging to use the FortiGate local disk.
What is the default behavior when the local disk is full?

  • A. No new log is recorded until you manually clear logs from the local disk.
  • B. Logs are overwritten and the only warning is issued when log disk usage reaches the threshold of 95%.
  • C. Logs are overwritten and the first warning is issued when log disk usage reaches the threshold of 75%.
  • D. No new log is recorded after the warning is issued when log disk usage reaches the threshold of 95%.

Answer: C


NEW QUESTION # 90
An administrator has configured a strict RPF check on FortiGate. Which statement is true about the strict RPF check?

  • A. Strict RPF checks the best route back to the source using the incoming interface.
  • B. Strict RPF allows packets back to sources with all active routes.
  • C. The strict RPF check is run on the first sent and reply packet of any new session.
  • D. Strict RPF checks only for the existence of at cast one active route back to the source using the incoming interface.

Answer: A

Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD33955


NEW QUESTION # 91
......

NSE4_FGT-7.0 Questions Prepare with Learning Information: https://actualtests.torrentexam.com/NSE4_FGT-7.0-exam-latest-torrent.html