Get 2022 Most Reliable OMG OMG-OCSMP-MBI300 Training Materials
The Realest Study Materials OMG-OCSMP-MBI300 Dumps
NEW QUESTION 24
Choose the correct answer.
The formula for the determinant of a square 2X2 matrix.
|ab|
|cd|
is a'd-b'c A subsystem receives one message for each value (i e. a(v) b(v). c(v) and d(v) where v is a real number) These messages can be in any order, and the ensure sequence is followed by an "end" message. The subsystem must calculate the determinant and output it upon receipt of the end message If there are multiple messages for one value (e g . two a(v) messages), or the end message is received before all values have been received, the subsystem should signal an error.
Which state machine correctly models the required behavior? If more than one slate machine is correct, select the one with the fewest slates.
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: D
NEW QUESTION 25
Choose the correct answer.
Where can a StateInvariant appear?
- A. in the s rates compartment of a block on a bdd
- B. on an object node In an act
- C. on a transition in a stm
- D. on a lifeline in a sd
Answer: D
NEW QUESTION 26
Choose the correct answer.
What is the best way to specify the behavior of a functional requirement?
- A. The project methodology will indicate which way is compatible with its process.
- B. Model a state machine that refines the functional requirement.
- C. The requirement text must be a clear and concise specification of the functionality.
- D. Model an activity that refines the functional requirement.
Answer: D
NEW QUESTION 27
Choose the correct answer.
What is one key advantage of using SysML parametrics versus traditional derived properties?
- A. A derived property requires an additional constraint expression, whereas SysML parametrics does not.
- B. it takes many more steps to specify derived properties in the typical tool compared to specifying constraint blocks.
- C. OCL-based constraint expressions can be used with SysML parametrics but not with derived properties
- D. SysML parametrics supports non causal expressions, whereas a derived property involves an expression with a fixed output direction
Answer: B
NEW QUESTION 28
Choose the correct answer.
Consider the following two activity diagram fragments labeled Fragment 1 and Fragment 2. The JoinSpecification for Fragment 1 is completely specified, but the JoinSpecification for Fragment 2 is not.
Which join specification for Fragment 2 will make it exhibit the same behavior as fragment 1? Assume that activities with the same names exhibit the same behavior
- A. (b1 or b?) and (b3 or b4)
- B. b1 or b2 or b3 or b4
- C. (b1 or b2) and b3 and b4
- D. The question cannot be answered because Activity Diagram Fragment 1 is ambiguous
Answer: C
NEW QUESTION 29
Choose the correct answer.
A system engineer specializing in rigid body dynamics wants to model the laws of motion (LOM) so that they may be reused to analyze different types of systems. The LOM consist of the mathematical relations R1 and R2. shown here.
(R1)s=ut + (1/2)at2
(R2) v = u + at
How should the system engineer represent and relate LOM. R1, and R2 in SysML?
- A. Create an activity for each of LOM. R1, and R2. Then, create actions in LOM that are typed by R1 and R2.
- B. Create a constraint block for each of LOM. R1, and R2- Then, create constraint properties m LOM that are typed by R1 and R2.
- C. Create a constraint block for each of LOM. R1. and R2 Then, create part properties in LOM that are typed by R1 and R2.
- D. Create a block for each of LOM. R1 and R? Then create part properties in LOM that are typed by R1 and R?
Answer: A
NEW QUESTION 30
Choose the correct answer.
How should a generalization set between Shape (superclass) and subclasses Polygon. Rectangle and Triangle be marked?
- A. {complete, disjoint{
- B. {incomplete, disjoint}
- C. {complete, overlapping}
- D. {incomplete, overlapping{
Answer: B
NEW QUESTION 31
Choose the correct answer.
A system engineer has created a SysML block structure for his system-of-interest. Two of the blocks (M and E) represent system-level abstractions of components that will be designed by a mechanical engineer and an electrical engineer m their respective computer-aided design (CAD) tools.
Given that the CAD models are wrapped as blocks B_mcad and B_ecad, what type of diagram should the system engineer use to quantitatively relate the properties of B_mcad and B_ecad to their system level abstractions M and E respectively?
- A. a parametric diagram
- B. an internal block diagram
- C. an activity diagram
- D. a block definition diagram
Answer: A
NEW QUESTION 32
Choose the correct answer.
Given the following diagram:
What needs to be determined in order to model the connection between components s0 and u3 in more detail?
- A. which parts of each component participate in the connection
- B. which parts of each component participate in a reference association
- C. whether any part that belongs to component s0 subclasses a pan that belongs to component u3
- D. whether component s0 subclasses component u3
Answer: A
NEW QUESTION 33
Choose the correct answer.
Given the following bdd:
Which Ibd corresponds?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: C
NEW QUESTION 34
Choose the correct answer.
Given the following block structure model:
What is the value of S1.vs when the parametric models are executed for the following instance?
- A. There is no value - the instance model is invalid
- B. 0
- C. 1
- D. 2
Answer: C
NEW QUESTION 35
Choose the correct answer
Given the following diagram:
Which statement is true?
- A. The Security view imports the Security viewpoint to ensure the security requirements are satisfied
- B. The Security view is intended to address the purpose specified by the Security viewpoint
- C. The Security viewpoint imports the model elements associated with flowing down the security requirements
- D. The Security viewpoint conforms to the requirements specified by the Security view
Answer: B
NEW QUESTION 36
Choose the correct answer.
Given a system for keeping birds away from airports One component, described by the following diagram directs audio signals at birds that approach a runway, its parts, as part properties, are typed by blocks.
A systems engineer has identified some blacks that type the pan properties, but as the design becomes more specific, the engineer discovers that these blocks exist in multiple variants.
What modeling choice does the engineer face at this point?
- A. whether to model variants of blocks that type part properties as (a) explicit subclasses of the blocks, or (b) part-specific types.
- B. whether to model variants of blocks that type part properties as (a) implicit subclasses of the blocks, or (b) part-specific types
- C. whether to model part properties as (a) a library, or (b) a logical hierarchy
- D. whether to model part properties as (a) a library or (b) a hierarchy of non-composite relationships
Answer: C
NEW QUESTION 37
Choose the correct answer.
Block 1 has a value property 'a' part 1. typed by Block! sends the message Ml If a>0; otherwise it sends message M2.
Which diagram depicts this scenario?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: D
NEW QUESTION 38
Choose the correct answer.
Which option correctly describes the effect of an object flowing into and out of a data store?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: D
NEW QUESTION 39
Choose the correct answer.
Given the following diagram fragment:
What does the multiplicity at the actor end mean?
- A. Two Initiator actor instances are required to trigger the use case
- B. Two Initiator actor instances are required to participate in the use case.
- C. At most two Initiator actor instances can perform the use case
- D. Multiplicities carry no meaning on use case diagrams
Answer: B
NEW QUESTION 40
Choose the correct answer
Different Block kinds are modeled using stereotypes such as <system>, <subsystem> or <software> Where are these stereotypes typically defined?
- A. A profile that maps modeling methodology concepts to the model defines the stereotypes
- B. Each modeler who writes requirements can define stereotypes
- C. The stereotypes are part of the SysML standard
- D. The modeling tool provides the stereotypes
Answer: D
NEW QUESTION 41
Choose the correct answer.
To "show what you know" about SysML a Systems Engineer (SE) must take a total of four examinations in order Model User (MU). Model Bulkier Fundamental (MBF), Model Builder intermediate (MBI> and Model Builder Advanced (MBA). The SE must also study before taking each exam.
Which activity diagram fragment correctly uses object state constraints to document the process of studying and taking the exams, ensuring that the exams are taken in order of increasing difficulty, and allowing for the possibility that exams may have to be repeated?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: D
NEW QUESTION 42
Choose the correct answer
Which diagram fragment validly depicts adding properties to a stereotype?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: C
NEW QUESTION 43
Choose the correct answer
What is the statement "An activity specifies the behavior of a use case?
- A. a constraint defined in SysML
- B. a constraint of the use case element
- C. a constraint of the activity element
- D. a guideline from a methodology
Answer: A
NEW QUESTION 44
Choose the correct answer
A sequence diagram depicts the beginning of a user's session with a piece of interactive software . The diagram must show that the -Software Session is created by some activity of the .User.
Which sequence diagram fragment expresses this?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: D
NEW QUESTION 45
......
LATEST OMG-OCSMP-MBI300 Exam Practice Material: https://actualtests.torrentexam.com/OMG-OCSMP-MBI300-exam-latest-torrent.html
