C1000-056 Exam Dumps Pass with Updated Feb-2022 Tests Dumps
C1000-056 exam questions for practice in 2022 Updated 62 Questions
NEW QUESTION 33
Where are recorded messages sent by default in the flow exerciser?
- A. They are sent to the input node where each message was saved
- B. They are sent to the output node where each message was saved
- C. They are sent to the Recorded Messages item located in the navigator
- D. They are sent to the Message Flow icon in the Flow Exerciser toolbar
Answer: D
NEW QUESTION 34
What are the correct sequence of steps to define the operations in a service interface?
Answer:
Explanation:
* Open your integration service in the Service editor by double-clicking the Service Description in the Application Development view, or by right-clicking and selecting Open.
* Select the Interface tab to see the interface editor.
* By default, a request-response operation is created when the integration service is created. Click the operation name to edit it.
* Add or remove request-response operations and one-way operations by using the icons.
* Add or remove inputs, outputs, and faults to operations by using the icons. In the Properties tab, click the name and type of an input, output, or fault to edit it. You can create a new complex type for an input, output, or fault by clicking the type and selecting New....
NEW QUESTION 35
The following flow is implemented in an online retailer's system to expose a web service that would process new orders then send shipping request(s) to the shipping carrier.
The shipping request messages should be put on a queue in the shipping carrier's secured SSL-enabled remote queue manager. What are two ways to set up the SSL connection to the remote queue manager?
- A. Create and configure an MQEndpoint policy to use SSL and attach it to the MQ Output node
- B. Check the "Use SSL" property in the MQ Output node properties
- C. Configure an SSL-enabled Security Identity by using the mqsisetdbparms command, then use that identity in the MQ Output node properties
- D. Check the "Use HTTPS" property in the MQ Output node
C Check the "Alternate User Authority" property in the MQ node
Answer: A
NEW QUESTION 36
The mqsicommandconsole command is a required prerequisite for running which two commands?
- A. mqsiAssemblylnstall
- B. mqsimanagelinlcs
- C. mqsiprofille
- D. mqsisetsecurity
- E. mqsichangeproperties
Answer: A,D
Explanation:
Explanation
The mqsicommandconsole command is required for the following commands:
* mqsiaddbrokerinstance
* mqsicreatebroker
* mqsimigratecomponents
* mqsisetsecurity
* mqsiAssemblyInstall
* mqsimanagexalinks
* mqsipackagebar
https://www.ibm.com/support/knowledgecenter/SSMKHH_9.0.0/com.ibm.etools.mft.doc/bn13550_.htm
NEW QUESTION 37
What is the maximum number of integration servers that can be used in a single server running IBM App Connect Enterprise?
- A. Up to 256
- B. Up to 512
- C. Up to 128
- D. Unlimited
Answer: D
Explanation:
Explanation
https://www.ibm.com/support/knowledgecenter/SSTTDS_11.0.0/com.ibm.etools.mft.doc/bn28100_.html
NEW QUESTION 38
Which statement is true about shared libraries?
- A. Integration Projects can reference shared libraries
- B. A shared library must be deployed with or before an application that references it
- C. Static libraries can reference shared libraries but cannot reference other static libraries
- D. If a shared library (A) references another shared library (B), shared library (B) can create a reference to shared library (A)
Answer: C
NEW QUESTION 39
Event-driven flows can be configured to run at regular intervals by adding which type of node in IBM App Connect Designer?
- A. Execute
- B. Timer
- C. Event
- D. Scheduler
Answer: C
NEW QUESTION 40
What is the correct order of steps to create an Integration Service from scratch?
Answer:
Explanation:
Explanation
To create an integration service by defining a new interface, complete the following steps:
* Open the New Integration Service wizard by using one of the following methods:
* Click File > New > Integration Service
* In the Application Development view, click Start by creating an integration service.
* Right-click the white space of the Application Development view then click New > Integration Service.
* Enter a name for the integration service, and optionally a description.
* To specify how you want to define the interface for your integration service, select Define it myself using the integration service editor.
* Specify where you want to store your interface definition.
* If the definition will be used by this integration service only, store the definition in the integration service project.
* If the definition might be used by multiple integration services, store the definition in a shared library.
Procedure
NEW QUESTION 41
What are two valid destination options for a Trace node?
- A. Local Error Log
- B. System Trace
- C. IBM MQ queue
- D. File
- E. Events
Answer: A,D
Explanation:
Explanation
https://www.ibm.com/support/knowledgecenter/SSMKHH_10.0.0/com.ibm.etools.mft.doc/ac04840_.htm
NEW QUESTION 42
When referencing a policy within a node configuration, what is the format of the reference?
- A. {PolicyProjectName}:PolicyName
- B. PolicyProjectName:PolicyName
- C. Policy:{PolicyName}
- D. ApplicationName:PolicyName
Answer: D
NEW QUESTION 43
What are the correct sequence of steps to define the operations in a service interface?
Answer:
Explanation:
* Open your integration service in the Service editor by double-clicking the Service Description in the Application Development view, or by right-clicking and selecting Open.
* Select the Interface tab to see the interface editor.
* By default, a request-response operation is created when the integration service is created. Click the operation name to edit it.
* Add or remove request-response operations and one-way operations by using the icons.
* Add or remove inputs, outputs, and faults to operations by using the icons. In the Properties tab, click the name and type of an input, output, or fault to edit it. You can create a new complex type for an input, output, or fault by clicking the type and selecting New....
NEW QUESTION 44
What command must be executed before running the mqsicreatebroker command on Linux to create an integration node?
- A. mqsicommandconsole
- B. mqsicvp
- C. mqsiservice
- D. mqsiprofile
Answer: D
Explanation:
Explanation
https://www.ibm.com/support/knowledgecenter/SSTTDS_11.0.0/com.ibm.etools.mft.doc/ae12720_.html
NEW QUESTION 45 
According to the API resource pictured above, there are three possible HTTP Return Codes: 400, 404, 200.
What is one way to set a HTTP Return code as 400 using ESQL?
- A. SET OutputLocalEnvironment.REST.Reply.Transport.HTTP = 400;
- B. SET OutputLocalEnvironment.ReplyStatusCode = 400;
- C. SET OutputLocalEnvironment.Destination.HTTP.ReplyStatusCode = 400;
- D. SET OutputLocalEnvironment.Reply.Transport.HTTP = 400;
Answer: C
NEW QUESTION 46
Which statement is true regarding a security profiles policy and a security profile?
- A. A security profile configures how a security profiles policy is used by a message flow.
- B. A security profiles policy is a synonym for a security profile.
- C. A security profiles policy configures a security profile at run time
- D. A security profile configures the use of a security profile policy at deploy time.
Answer: B
NEW QUESTION 47 
According to the API resource pictured above, there are three possible HTTP Return Codes: 400, 404, 200.
What is one way to set a HTTP Return code as 400 using ESQL?
- A. SET OutputLocalEnvironment.REST.Reply.Transport.HTTP = 400;
- B. SET OutputLocalEnvironment.ReplyStatusCode = 400;
- C. SET OutputLocalEnvironment.Destination.HTTP.ReplyStatusCode = 400;
- D. SET OutputLocalEnvironment.Reply.Transport.HTTP = 400;
Answer: C
NEW QUESTION 48
What is the best practice approach for storing shared development resources?
- A. Tables
- B. Libraries
- C. Message Map
- D. Files
Answer: B
NEW QUESTION 49
What is the correct order of steps to create an Integration Service from scratch?
Answer:
Explanation:
Explanation
To create an integration service by defining a new interface, complete the following steps:
* Open the New Integration Service wizard by using one of the following methods:
* Click File > New > Integration Service.
* In the Application Development view, click New > Start by creating an integration service.
* Right-click the white space of the Application Development view then click New > Integration Service.
* Enter a name for the integration service, and optionally a description.
* To specify how you want to define the interface for your integration service, select Define it myself using the integration service editor
* Specify where you want to store your interface definition.
* If the definition will be used by this integration service only, store the definition in the integration service project.
* If the definition might be used by multiple integration services, store the definition in a shared library.
Procedure
NEW QUESTION 50
In a message flow, what are two valid event sources of a monitoring event?
- A. Terminal events
- B. Node events
- C. Failover events
- D. Transaction events
- E. Mapping events
Answer: A,D
Explanation:
Explanation
Event typesYou can configure a message flow to emit two types of events: transaction events and terminal events. There are three types of transaction events: start, end, and rollback. The transaction events are emitted only from input nodes such as MQInput and HTTPInput. Terminal events are emitted from any terminal of any node.
https://www.ibm.com/developerworks/websphere/library/techarticles/0911_fan/0911_fan.html
NEW QUESTION 51
What is the correct order of prerequisite steps to install IBM App Connect Enterprise on IBM Cloud Private?
Answer:
Explanation:
NEW QUESTION 52
What Event Coordination option must be implemented in the Collector node so that message collections are propagated in the order they have been completed?
- A. FIFO
- B. Disabled
- C. First complete collection
- D. All complete collections
Answer: D
NEW QUESTION 53
What is the file format of resource statistics that are written by resource managers?
- A. JSON
- B. HTML
- C. CSV
- D. XML
Answer: C
NEW QUESTION 54
The message flow security manager can be invoked by configuring a security enabled input node. The following diagram shows an example message flow and gives an overview of the sequence of events that occur when an input message is received by a security enabled input node in the message flow. Select the number that would interact with LDAP.
Answer:
Explanation:
Explanation
4
NEW QUESTION 55
What is a difference between using Convert Single Project and Convert Multiple Projects when converting from projects to applications and libraries?
- A. Convert Single Project is for one existing project and Convert Multiple Projects is for one or more existing projects.
- B. Convert Single Project will put all artifacts into one application or library, while Convert Multiple Projects will create a new application or library for each existing project.
- C. Only Convert Single Project can convert existing Message Broker projects into IBM App Connect Enterprise applications and libraries, Convert Multiple Projects requires the projects to meet IBM Integration Bus standards before converting.
- D. Convert Single Project is for converting an existing project and any references into one application while Convert Multiple Projects will convert into multiple desired applications with shared libraries.
Answer: D
NEW QUESTION 56
Which two IBM App Connect Toolkit methods can help troubleshoot message flows?
- A. Flow Debugger
- B. Flow Exerciser
- C. Flow Integration Debugger
- D. Java Debugger
- E. User Trace
Answer: A,B
NEW QUESTION 57
When installing IBM App Connect Enterprise for a shared installation on Linux, which group do users needed to be added to in order to gain access to the platform?
- A. mqnodeusers
- B. mqusers
- C. mqsiadmin
- D. mqbrkrs
Answer: D
Explanation:
Explanation
https://www.ibm.com/support/knowledgecenter/SSTTDS_11.0.0/com.ibm.etools.mft.doc/bh25992_.htm
NEW QUESTION 58
......
Authentic C1000-056 Dumps With 100% Passing Rate Practice Tests Dumps: https://actualtests.torrentexam.com/C1000-056-exam-latest-torrent.html
