2022 Updated Verified 1z0-1048-22 Q&As - Pass Guarantee or Full Refund
[Sep-2022] 1z0-1048-22 Certification with Actual Questions from TorrentExam
NEW QUESTION 22
How should you disable the Delete button for an employee after their time card has been submitted?
- A. by specifying the Time Entry Actions Allowed on the Time Card Layout
- B. by specifying the Time Entry Actions Allowed on the Security Task Profile
- C. by specifying the Time Entry Actions Allowed on the Time Entry Processing Profile
- D. by specifying the Time Entry Actions Allowed on the Worker Time Entry Setup Profile
Answer: C
NEW QUESTION 23
Your customer identifies grades as 01, 02, 03, 04, and 05, with 05 being the most senior. You need to apply the same Time Processing Profile (TPP) to everyone below grade 04.
How should you do this?
- A. Add the TPP name to the definition of the grade.
- B. When creating the TPP, add the grades that will receive that TPP to the definition.
- C. Write a Fast Formula which, when executed, would return all employees in grades 01 to 03, and attach that to the TPP definition.
- D. Create a group using an evaluation criteria of Grade Less Than 04 and attach that group to the TPP.
- E. Create a group using an evaluation criteria of Grade Equal To 01, Grade Equal to 02, or Grade Equal to 03, and attach that group to the TPP.
Answer: E
NEW QUESTION 24
Your customer has asked you to define an overtime period that is different from the time card period and wants to display the overtime bar on the calendar page and in the time card matrix.
Which two solutions meet this requirement?
- A. Create a separate repeating time period by selecting overtime checkbox in period usage section.
- B. Create a repeating time period by selecting period type as overtime to enable overtime periods separately.
- C. Enable the overtime option on the time categories to show overtime periods separately.
- D. Create a repeating time period by selecting formula option to enable overtime periods separately.
- E. Enable the highlight overtime periods option in the time entry properties section of time card matrix.
Answer: B,E
NEW QUESTION 25
How do you configure a Time Calculation Rule (TCR) formula and template to enable the TCR rule to display process results and a validation message from the same rule?
- A. Define both a new TER and new TCR formula and TCR and TER templates. The TCR template defines a new input parameter to select the TER template, and then defines a TCR rule to display process and message results.
- B. Define a TER formula to call a TCR formula within the same TER formula. Define in a new TER template to enable the TER. Use the TER template to pass the process results and message back to a new TCR Template on the Outputs train stop.
- C. Define both a new TER and new TCR formula and TCR and TER templates. The TCR template defines the process results, the TER defines the validation message. Assign the TCR and TER using appropriate rule sets and time processing profiles.
- D. Define a new TCR formula that calls a WFM validation utility formula within the TCR formula. Create a new TCR template to process time card results and pass back both TCR results and a validation message to the time card.
- E. Define the TCR formula to call a Time Entry Rule (TER) formula and pass TER formula results to the TCR formula. Define a new TCR template to display the process and message results on the Output train stop.
Answer: E
NEW QUESTION 26
What time card criteria can you run with the Mass Submit and Approve Time Card process?
- A. Date Range, Person Name, Group Name, and Time Card Status
- B. Date Range, Person Name, Group Name, Approver Name, Location, Department
- C. Date Range, Person Name, Person Number, Group Name, and Time Card Status, Approver Name
- D. Date Range, Person Name, Person Number, Group Name, and Time Card Status
Answer: A
NEW QUESTION 27
What is the process for correcting errors in recent time cards that have been approved, transferred to Oracle Cloud Payroll, and paid?
- A. The worker should inform the manager of the error and the manager will inform Payroll, who will correct the error directly in Oracle Cloud Payroll.
- B. The worker should inform Payroll, who will correct the error directly in Oracle Cloud Payroll.
- C. The worker should correct and submit the time card which, after approval, will be transferred to Oracle Cloud Payroll immediately.
- D. The worker should correct and submit the time card which will be transferred to Oracle Cloud Payroll immediately.
- E. The worker should correct and submit the time card which, after approval, will be transferred to Oracle Cloud Payroll the next time the Load Time Card batches process is run.
Answer: A
NEW QUESTION 28
Which three tasks can a Time and Labor Manager perform from the planned schedule?
- A. Schedule shifts.
- B. Monitor absences.
- C. Balance workloads.
- D. Monitor work coverage.
- E. Enter time for workers.
Answer: A,C,D
NEW QUESTION 29
When selecting delivered formula to use in defining a new template, if two delivered formula accomplish the same results, when must the formula with _AP be selected?
- A. When the formula, template, and rule must access the time card data in an advanced sort order to complete correctly.
- B. Selecting the formula defined with _AP is not required.
- C. When the rule created with the formula/template must access data outside the current time card data.
- D. When the formula, template, and rule must process first in the rule set. Formula identified with _AP enables additional processing order logic from within the Time and Labor rule processing engine.
Answer: C
NEW QUESTION 30
You need to assign a worker as a scheduler and act on a manager's behalf. The worker should have access to scheduling groups X and Y, but not to Z.
How should you set this up?
- A. You only need to create a scheduler profile for this worker
- B. You need to assign this worker as a scheduler to the correct scheduler profiles and give this worker the Time and Labor Manager role
- C. You only need to give the worker the Time and Labor Manager role
- D. Only line managers can be schedulers
Answer: A
NEW QUESTION 31
Which statement is true about the way the planned schedule is defaulted?
- A. It is always defaulted with the workers' work schedules.
- B. It is always defaulted with the workers' standard working hours.
- C. All three of the above options are true.
- D. It is defaulted with the workers' availability.
Answer: D
NEW QUESTION 32
You need to easily identify and copy time card data while managing time cards.
Which action can use in the Favorite Time Cards feature to accomplish this?
- A. delete a current time card
- B. recalculate for retroactive changes
- C. create or complete your current time card
- D. process time cards for mass approval
Answer: C
NEW QUESTION 33
You want to enable a contingent worker to view, edit, and create time cards for all workers in your organization in the US.
Which role-based security access and privilege should you give the worker?
- A. Contingent workers cannot be enabled to act as Time and Labor Managers.
- B. You need to give the contingent worker the Data Role that has been created for US workers, the job role for Time and Labor Manager, and the Duty Role for Time Card Management.
- C. You need to give the contingent worker the Data Role that has been created for US managers, the job role for Time and Labor Employee, and the Duty Role for Time Card Entry.
- D. You need to give the contingent worker the Data Role that has been created for US workers, the job role for Contingent Worker Manager, and the Duty Role for Time Card Entry.
Answer: B
NEW QUESTION 34
Your client wants to minimize the validation rules that execute against a time card and only under certain circumstances they want certain validation rules, if required, to display validation messages.
Which option will accomplish your customer's goals?
- A. Create a formula that incorporates program logic to check for certain time card entries and, when present, execute the validation rule. Create the new template and rule. Place the rule that uses the formula in a rule set and assign the rule set using an appropriate profile.
- B. Create a new formula/template and rule that uses an input parameter to check for certain values defined in the rule using a time category input parameter. When present, complete execution of the rule. Place the rule that uses the formula in a rule set and assign the rule set using an appropriate profile.
- C. Place the validation rules in a rule set, assigning a properly formatted time category on the same rows in the rule set. Assign the rule set to the workers using an appropriate profile.
- D. Create a new validation formula/template and rule that accesses HCM data to only execute if certain HR data exists for the worker and processes the validation logic on the time entries. Place the rule that uses the formula in a rule set and assign the rule set using an appropriate profile.
Answer: C
NEW QUESTION 35
Which are valid approval time periods for Time and Labor?
- A. weekly, semimonthly
- B. weekly, biweekly
- C. weekly, semimonthly, monthly
- D. weekly, biweekly, monthly
- E. any, just depends on the Repeating Time Period used in the Approval Rule
- F. any, just depends on the HCM Group used in the Approval Rule
Answer: E
NEW QUESTION 36
A customer defines work schedules by using both elapsed and time-based shifts. How should you configure the Time and Labor time entry layout so that it properly shows the scheduled absences on the time card?
- A. The time entry layout must include start and stop times along with the hidden Absence Plan time attribute and the displayed absence values.
- B. The time entry layout must include start and stop times along with the required assignment, in addition to a time card field for the absence values.
- C. Absence entries can be entered only by suing the Calendar Entry layout in the layout set.
- D. The time entry layout must be part of a layout set that is configured by using the Absence Management Time Consumer template.
- E. The time entry layout must contain the delivered, but hidden Schedule time attributes time card field.
Answer: B
NEW QUESTION 37
Some users are complaining that the Time and Labor system is allowing them to record time against projects in which they are not team members. Further, the time type column name is project name, whereas the values are project numbers.
What should you do to correct this issue?
- A. Create a new layout set with the "Enable Project Team membership" option selected. Edit the time card layouts for the new layout set, delete the "Project Number" row, create a new row, select "Project Name", and then assign to the appropriate time entry profile.
- B. The "team member" issue cannot be fixed in Time and Labor; it must be fixed in Cloud Projects. Also, because the time type selected cannot be changed, you change the column name to "Project Number" so that it is consistent with the data selected.
- C. This cannot be done in Time and Labor, but it can be done in Cloud Projects. So you would have to change appropriate options in Cloud Projects to fix both issues.
- D. Edit the existing layout set and select the "Enable Project Team membership" option from the drop-down list. Create a new time card layout from scratch and select the "Project Name" check box.
- E. Create a new layout set with the "Enable Project Team membership" option selected. Because the time type selected cannot be changed, you change the column name to "Project Number" so that it is consistent with the data selected.
Answer: A
NEW QUESTION 38
Your customer wants to use badge readers as a time collection device. You have added your device supplier to the lookup as BADGE_READERS_INC.
While adding the supplier device events to the lookup, which two lookup codes should you use for your Badge In and Badge Out events?
- A. BADGE_READERS_INC_OUT
- B. BADGE_READERS_INC_IN_OR_OUT
- C. OUT_BADGE_READERS_INC
- D. IN_BADGE_READERS_INC
- E. BADGE_READERS_INC_IN
Answer: C,D
NEW QUESTION 39
Which configuration step should you perform to display the unit of measure and quantity fields in time card matrices?
- A. Configure layouts to display the unit of measure column for time entries.
- B. Configure time categories to display the unit of measure column for time entries.
- C. Enable display of the unit of measure option on the payroll time type attribute for the required element.
- D. Enable display of the unit of measure option in the time processing setup profile.
- E. Enable display of the unit of measure option in the time entry setup profile.
Answer: E
NEW QUESTION 40
......
1z0-1048-22 Real Valid Brain Dumps With 85 Questions: https://actualtests.torrentexam.com/1z0-1048-22-exam-latest-torrent.html
